Pee Jay Impex

Nycolube 30 is a petroleum lubricating oil with a minimum viscosity of 11 cSt at 40°C. It is inhibited against corrosion and has water-displacing properties.

Nycolube 30 is a general purpose preservative oil for military equipment and is primarily used to protect weapons of all calibers from rust during storage.

Nycolube 30 remains fluid at very low temperature and can be used down to -50°C in applications where lubrication capability and rust-protection are required. 

Nycolube 7870 is�a petroleum lubricating oil with a viscosity of 9.5 cSt at 40�C. It is inhibited against oxidation and corrosion. Nycolube 7870 is a general purpose lubricating oil for aircraft parts and is primarily used as for aircraft instruments and electronic equipments (automatic pilot).

Nycolube 3525 is�a petroleum oil with a viscosity of 9 cSt at 100�C and contains some high performance extreme-pressure additives.

TURBONYCOIL 600 is a standard lubricating oil with a viscosity of 5 cSt at 100�C based on high thermal stable polyol esters, and fortified with carefully selected anti-oxidant, antiwear and anti-corrosion additives.

Brayco 599 is designed for use as an additive for turbine engines and helicopter transmissions which use MIL-PRF-23699F lubricating oil.
Brayco 599 should be added to the oil sump immediately after an oil change when the equipment is intended to be placed in storage, especially in locations where high humidity and salt spray are present. The corrosion inhibited oil should be capable of limited use, not to exceed 25 hours.

Nycolube 11B is�a synthetic lubricating oil with a viscosity of 13 cSt at 40�C, based on neopolyol esters. It is inhibited against oxidation and corrosion. Nycolube 11B is primarily used as lubricant for aircraft instruments and electronic equipments.